Solder Feed Tube Types:
TR， TAL， TAS， LU
Apollo Seiko solder feed tube connects solder feeder with soldering iron unit, make the solder wire feed to the the tinning area of the iron tip.
Part Numbering Example:
TAL-0.8-650S60
TAL is the tube model
(0.8 is solder diameter in mm)
(650 is total length in mm)
(S60 is stainless steel end length in mm)
Available stainless steel end length: S60, S90, WH120
List of TAL Solder Feed Tube
| Machine Model | P/N for Point Soldering | P/N for Slide Soldering |
| Terra / Luna / L-CAT EVO | TAL0.3-450S60 TAL0.4-450S60 TAL0.5-650S60 TAL0.65-1000S60 TAL 1.0-450S60 | TAL0.3-450S90 TAL0.4-450S90 TAL0.5-650S90 TAL0.65-1000S90 TAL0.8-1500S90 |
* The length of feed tube listed above is for example only. Any of the specified lengths can be ordered with any wire diameter. It is recommended to use shorter tube lengths with smaller wire diameters
Recommended Posts
Showing 3 comments
We are using the following solder tube for our application TAL0.8-1000S60 but we have been getting excessive solder clogs on our EVO robot with (alpha TELE+ 63SN/37PB SOLDER .032” (.0821mm) solder.. Would this be the correct tube selection for this solder diameter?
The feeder tube is selected according to solder wire, the one you choose it correct. Feeder tube diameter is usually bigger than solder wire, the inner diameter is about 1.0mm.
please provide quotation for TAL0.8-1500S90