This type of auto feed screwdriver is applied for screws which cap is below Φ5.5mm, screw length 7~18mm; tolerance less than 0.1mmAFS10 Auto Feed Screwdriver

For special screws or very small screws, we need screw samples to calibrate machine and test the performance.

Features of Auto Feed Screwdriver

  • Max. screw fastening speed is 0.8s/piece, manual fastening speed is at least 2s/piece
  • Kilews Screwdriver, rotate speed 2000
  • New generation auger-type screw feeding type, reduce screw jam rate
  • Main component is made with 304 stainless steel, increase product’s lifetime
  • Accompany with LCD display, controlled by PLC, accomplish digital management
  • The latest portable design, screw issues can be solved in 10s (theory time)
  • Micro PC counter, prevent to loss screw fastening
  • Float screw detect function to prevent screw loose

Auto feed Screwdriver Structure

Specifications

Model AFS-10
Self-feeding Screwdriver Structures
Voltage AC220V/50Hz (110V customizable)
Power 35W
Air Pressure 2~6kg/cm²
Screw Length Screw length is 2 times more than nut’s size
Screw Feeding Control
Main Program PLC control
Human-computer interface Digital display
Mode Manual & Auto
Screwdriver Kilews brand (can change to others as per requirement)
Applied Scope
Product Size customized
Horizontal Adjustment Range ±30mm
Vertical Adjustment Range ±15mm
Screw fastening depth 20mm (customizable if need deeper)
Minimum screw hole distance 10mm

Machine Parameters

Power, 35W,Voltage, 220V

Auto Filtering, YES, Auto Feeding, YES

Applied Scre, M1.2~M5, Fasten Speed, 40~70pcs/s

Screw Length, 20mm, Tank Capacity, 200~4000pcs

Auto Feed Screwdriver Configuration List

  1. Case Shell, 1x
  2. Power cable, 1x
  3. Inlet pipe, 1x
  4. Feed tube, 1x
  5. Screwdriver connection cable, 1x
  6. Instruction manual, 1x
  7. Screwdriver, 1x
  8. Screw divider, 1x
  9. Screw feeder, 1x
  10. Clamp, 1x
  11. Displayer, 1x
  12. Phillips screwdriver bit, 1x
  13. Balancer, 1x
  14. Magnetic bar, 1x
Recommended Posts
Showing 5 comments
  • Rattan Singh
    Reply

    Automatic screw feeder required for LED bulb assembly

    • Leisto
      Reply

      Got it! We’ll reply you by email.

  • Dayan Santos
    Reply

    I would like to receive a quote for this product. Auto feed Screwdriver

  • Ross Durran
    Reply

    Hello

    Can I get a quotation for your AFS-700A machine please?

    Also can you mount the screwdriver in a fixed mount to deliver screws to a set position below ?

    The movement of the screw driver down to the correct position would need to be driven by an air cylinder.

    Also can you run x2 screwdrivers off one feeder ?

    Thanks
    Ross Durran
    Managing Director
    Australia

    • Leisto
      Reply

      Hello Ross,
      Yes can mount as per your wish, what is your idea?
      The screw feeder can drives up to 4 screwdrivers, the screws should be fed at a time or in order.
      Any more questions please send in email.

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.